2013年7月26日星期五

AX0-100 dernières questions d'examen certification Axis et réponses publiés

Le programme de formation Axis AX0-100 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.


Un bon choix de l'outil à se former est le point essentiel à passer le test Axis AX0-100, et les documentations à propos de rechercher le test Axis AX0-100 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.


Code d'Examen: AX0-100

Nom d'Examen: Axis (Axis Network Video Exam)

Questions et réponses: 145 Q&As

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Axis AX0-100.


Bien qu'il ne soit pas facile à réussir le test Axis AX0-100, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Axis AX0-100, mais encore à vous aider d'économiser votre temps.


AX0-100 Démo gratuit à télécharger: http://www.pass4test.fr/AX0-100.html


NO.1 Which is a benefit of using VLANs and IP subnets?
A. An encrypted communication link is established over the internet, allowing surveillance video to be
securely viewed off-site
B. The network provides end-to-end encryption to prevent malicious users from intercepting network
traffic
C. The network will only allow access from authorized devices, eliminating the risk that malicious users
disconnect cameras to intercept network traffic
D. Network surveillance video can be kept separate from other network traffic, reducing the risk that
malicious users will intercept it
Answer: D

Axis examen   AX0-100 examen   AX0-100 examen   AX0-100   AX0-100

NO.2 When initiating a surveillance project with a customer, which of the following should be considered first?
A. Understand which camera models to use
B. Understand the customer's technical knowledge
C. Understand the customer's goals and requirements
D. Understand the legal aspects for the installation
Answer: C

Axis   AX0-100 examen   AX0-100   AX0-100

NO.3 DRAG DROP
Match each function to the correct video surveillance system component. Drag each gray box from the left
column to the matching blue box in the right column.
Answer:

NO.4 In a network surveillance installation, the purpose of a router is to
A. Forward the video stream between networks.
B. Forward the video stream to the correct receiver within a network.
C. Separate audio and video traffic to reduce audio latency.
D. Separate the video stream from the camera control signaling.
Answer: A

Axis   AX0-100   AX0-100 examen   AX0-100

NO.5 Which of the following allows customer to access between 2-4 channels of live and online stored video
at any time?
A. AXIS Camera Station
B. AXIS Video Hosting System (AVHS)
C. AXIS Camera Management
D. AXIS Media Control
Answer: B

Axis   certification AX0-100   certification AX0-100

NO.6 In many places 24 V AC has been popular as a power source but now 12 V and 24 V DC is increasing in
popularity because
A. There is more energy in DC.
B. It is easier to back-up DC with battery.
C. There is less power loss in cables with DC.
D. There is less risk for surge with DC.
Answer: B

Axis examen   AX0-100   AX0-100   AX0-100   AX0-100

NO.7 A company is looking for a dome designed to withstand vibrations inherent to transportation. Which of
the following cameras should be recommended?
A. AXIS P3344-VE
B. AXIS M3014
C. AXIS M3114-R
D. AXIS P1344
Answer: C

Axis   AX0-100   certification AX0-100

NO.8 In setting up PTZ control for an Axis encoder, it's very easy to overlook a very important step in the
configuration process. After properly connecting the communication wires to the encoder, the next
recommended step in the setup is:
A. Downloading the correct Device ID from the Axis website
B. Setting the Baud Rate to match the analog PTZ' s
C. Setting the Device ID to match the analog ID
D. Uploading the correct PTZ driver
Answer: D

Axis   certification AX0-100   AX0-100

NO.9 Which is an impact on cameras that are operating above their specified temperature limit?
A. Noise is increased
B. Frame rate is reduced
C. Light sensitivity is decreased
D. Resolution is reduced
Answer: A

Axis   AX0-100   certification AX0-100   AX0-100

NO.10 Which of the following will allow a customer to have a PTZ camera automatically change between
three predefined positions?
A. Configure the camera's I/O ports to control the preset positions
B. Use the Guard Tour capability to switch between the preset positions
C. Switch between the predefined positions using a joystick
D. Use the auto tracking capability to switch between the preset positions
Answer: B

certification Axis   AX0-100 examen   AX0-100 examen

NO.11 Which of the following are outdoor rated products? (Choose two)
A. AXIS M3114-R
B. AXIS P3304-VR
C. AXIS P1344-E
D. AXIS P3344-VE
E. AXIS M1031-W
Answer: C,D

Axis   AX0-100 examen   certification AX0-100

NO.12 Which technology can a Video Management Software (VMS) partner incorporate to reduce the impact
on recorded video during server maintenance?
A. Local storage at the camera
B. Meta data stream
C. AXIS Camera Application Platform (ACAP)
D. SNMP
Answer: A

Axis   certification AX0-100   AX0-100   AX0-100 examen

NO.13 Which setting would best adjust a hard yellow tint as shown in the pictures below?
A. Image contrast
B. White balance
C. Color saturation
D. Image brightness
Answer: B

certification Axis   AX0-100   AX0-100   AX0-100   AX0-100 examen

NO.14 DRAG DROP
Match the protocol to its default port number. Drag each gray box from the left column to the matching
blue box in the right column.
Answer:

NO.15 Which is true regarding the use of a smoked (tinted) dome instead of a clear dome?
A. Decreases color fidelity
B. Decreases field of view
C. Disables infrared capabilities
D. Reduces light sensitivity
Answer: D

Axis   AX0-100   AX0-100 examen   AX0-100   AX0-100   AX0-100 examen

NO.16 A customer has a lot of motion blur on recordings from a fixed camera. What would be the most likely
setting to address the blurring?
A. Gain level
B. Brightness
C. Backlight compensation
D. Shutter speed
Answer: D

Axis   AX0-100   AX0-100   AX0-100   AX0-100

NO.17 Which of the following statements are true for H.264? (Choose two)
A. The size of an l-frame depends on the preceding P-frame
B. Increased motion in a scene means increased bit rate
C. Group of Video (GOV) length is directly affected by the sizes of the I- and P-frames
D. A P-frame references preceding and succeeding P-frames
E. Longer GOV length means reduced bit rate
Answer: B,E

certification Axis   AX0-100 examen   AX0-100

NO.18 Which statement is true regarding H.264 and Motion JPEG?
A. The highest bandwidth savings using H.264 compared to Motion JPEG is at high frame rates
B. Bandwidth savings using H.264 has nothing to do with frame rate, only scene complexity
C. Bandwidth savings using H.264 has nothing to do with frame rate, only Group of Video (GOV) setting
D. The highest bandwidth savings using H.264 compared to Motion JPEG is at low frame rates
Answer: A

certification Axis   AX0-100   AX0-100 examen   certification AX0-100   certification AX0-100   certification AX0-100

NO.19 Axis recommends shielded cables for outdoor installations primarily to ensure
A. Image quality.
B. Surge protection.
C. Life time of cable installations.
D. Conformity with SMPTE standard.
Answer: B

Axis   AX0-100   AX0-100

NO.20 What is the main purpose of the Arctic Temperature Control functionality.?
A. To protect the camera electronics
B. To protect the camera mechanics
C. To protect the camera lens
D. To protect the camera power
Answer: B

Axis examen   AX0-100   AX0-100

Pass4Test a de formations plus nouvelles pour le test Axis AX0-100. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Axis AX0-100 à tous les candidats qui nous choisissent. L'importance de Certification Axis AX0-100 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.


没有评论:

发表评论