Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test 000-034 est lequel très important dans les tests de Certification IBM. Pour être qualifié de IBM, on doit obtenir le passport de test IBM 000-034.
La Q&A IBM 000-034 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification IBM 000-034.
Est-ce que vous vous souciez encore de réussir le test IBM 000-034? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
Pass4Test est un seul site web qui peut offrir toutes les documentations de test IBM 000-034. Ce ne sera pas un problème à réussir le test IBM 000-034 si vous préparez le test avec notre guide d'étude.
Code d'Examen: 000-034
Nom d'Examen: IBM (IBM Tivoli Monitoring V6.2.2 Fundamentals)
Questions et réponses: 102 Q&As
Est-que vous s'inquiétez encore à passer le test Certification 000-034 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de IBM 000-034? Si vous voulez réussir le test IBM 000-034 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test IBM 000-034 sans aucune doute si vous choisissez le Pass4Test.
000-034 Démo gratuit à télécharger: http://www.pass4test.fr/000-034.html
NO.1 What is provided for a user to view agent specific IBM Tivoli Monitoring (ITM) data when Application
Support is installed and configured on ITM components?
A. Workspaces, Users, Events
B. Workspaces, Situations, Queries
C. Expert Advice, Charts, Templates
D. Situations, Queries, Take Actions
Answer: B
IBM 000-034 000-034 000-034 certification 000-034 certification 000-034
NO.2 What type of link uniquely identifies the target workspace?
A. Dynamic
B. Filtered
C. Relative
D. Absolute
Answer: D
IBM examen 000-034 certification 000-034 000-034 examen 000-034 certification 000-034
NO.3 What determines the eligibility of a situation to a Navigator item?
A. Situation type.
B. Situation event state.
C. Managed systems associated with the Navigator item.
D. All situations are eligible for association with any Navigator item.
Answer: C
IBM 000-034 certification 000-034 000-034 examen
NO.4 Which two items are managed by right clicking an agent in a navigator tree? (Choose two.)
A. Queries
B. Policies
C. Situations
D. Attributes
E. Attribute Groups
Answer: B, C
IBM 000-034 000-034
NO.5 When is persistent event monitoring useful in IBM Tivoli Monitoring (ITM)?
A. To count the number of events in ITM.
B. To determine when a situation is needed.
C. To determine whether a condition is consistent or intermittent.
D. To determine when more agents must be deployed across a ITM environment.
Answer: C
certification IBM 000-034 examen 000-034 000-034 certification 000-034
NO.6 How does a sampled event get closed in IBM Tivoli Monitoring?
A. A sampled event can be manually closed by a user.
B. A sampled event is closed after 60 minutes by default.
C. A sampled event is closed when the condition that raised it becomes true.
D. A sampled event is closed when the condition that raised it is no longer true.
Answer: D
IBM 000-034 certification 000-034
NO.7 Which two places can Workspace Administration Mode permission authority be set? (Choose two.)
A. Users
B. Members
C. Member Of
D. User Groups
E. User Policies
Answer: A, D
certification IBM certification 000-034 000-034 examen
NO.8 How are new managed systems groups created?
A. They are created when IBM Tivoli Monitoring is installed.
B. They are created in the Manage Tivoli Enterprise Monitoring Services.
C. They are created using the Object Editor under the Managed Systems Group tab.
D. They are created with the Situation Editor within the Tivoli Enterprise Portal client.
Answer: C
IBM examen 000-034 000-034 examen
NO.9 What are the three default user groups provided with Tivoli Enterprise Portal?
A. Administrator, Diagnostic Users, Operator
B. Administrator, Application Users, Operator
C. Application Users, Diagnostic Users, Operator
D. Administrator, Diagnostic Users, Application Users
Answer: A
IBM 000-034 certification 000-034 000-034 examen 000-034
NO.10 Which workspace chart best represents the proportional value of each data point to the whole.?
A. Pie Chart
B. Bar Chart
C. Plot Chart
D. Circular Gauge Chart
Answer: A
IBM 000-034 000-034 examen certification 000-034
NO.11 When performing an investigation into the increased disk space usage of a Tivoli Enterprise Monitoring
Agent, it is discovered that the historical data file is quite large. Which two actions will decrease the
amount of data stored in that file? (Choose two.)
A. Change Summarization from Daily to Hourly.
B. Reduce the Warehouse Interval from 1 day to 1 hour.
C. Increase the Warehouse Interval from 1 hour to 12 hours.
D. Increase the Collection Interval from 1 minute to 15 minutes.
E. Decrease the Collection Interval from 30 minutes to 5 minutes.
Answer: B, D
IBM examen 000-034 000-034 000-034 examen
NO.12 Where are policies designed in the Tivoli Enterprise Portal client?
A. In the Views.
B. In the Workspace.
C. In the Workflow Editor.
D. In the Situation Editor.
Answer: C
certification IBM certification 000-034 certification 000-034
NO.13 What is an example of a data element that can be monitored with a situation?
A. CPU usage.
B. Timestamp for event arrival.
C. Event acknowledgement time.
D. Number of situations deployed.
Answer: A
IBM 000-034 000-034 examen
NO.14 Where are attributes to be displayed in a workspace view selected?
A. In the Query tab of each workspace Properties.
B. In the Filters tab of each workspace Properties.
C. In the Query tab of each workspace view's Properties.
D. In the Filters tab of each workspace view's Properties.
Answer: D
IBM examen 000-034 certification 000-034 000-034
NO.15 How is it determined if a situation is associated with a Navigator item?
A. Launch the Situation Editor from the toolbar.
B. Right click the Required Navigator Item and select Situations.
C. Select the properties for the Navigator Item and click Situations.
D. Filter the situations for the Navigator item by Associated with Navigator Item.
Answer: B
IBM examen 000-034 000-034 examen certification 000-034
NO.16 What is the purpose of the connectors in a Common Event Console?
A. The Event Handler is incorporated to pass events.
B. Connect to an event repository for the Common Event Console.
C. Retrieve event data to be displayed in the Common Event Console.
D. Send messages to the Message Log view from the Common Event Console.
Answer: C
IBM 000-034 certification 000-034 certification 000-034 000-034
NO.17 When can an acknowledgement be created?
A. When others are working on the event.
B. When operations staff makes a request.
C. When an event indicator is visible in the Navigator.
D. When a situation fires and the administrator wants to be first to acknowledge the event.
Answer: C
IBM certification 000-034 certification 000-034
NO.18 What is the minimum interval for Summarization and Pruning?
A. 1 minute
B. 5 minutes
C. 15 minutes
D. 60 minutes
Answer: C
IBM 000-034 certification 000-034 000-034
NO.19 What is used to quickly switch from one workspace to another in the Desktop Portal Client?
A. Link
B. Launch
C. Bookmark
D. Graphic Icon
Answer: A
IBM 000-034 examen certification 000-034 000-034 examen 000-034
NO.20 How are attributes related to workspaces?
A. Workspaces use views to display attributes to the user.
B. Workspaces use attributes to determine graph types to display to the user.
C. Workspace settings are stored in the Tivoli Enterprise Portal Server using attributes.
D. Workspaces use attributes to determine which navigator items to associate with in the Navigator tree.
Answer: A
IBM 000-034 000-034 000-034 000-034
Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.
没有评论:
发表评论