Le test Certificat Juniper JN0-360 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Juniper JN0-360. Vous allez prendre toutes essences du test Juniper JN0-360 dans une courte terme.
Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Juniper JN0-360. Le guide d'étude de Pass4Test comprend les excercices de Juniper JN0-360 et la Q&A qui peut vous permetrre à réussir 100% le test Juniper JN0-360. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
Code d'Examen: JN0-360
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))
Questions et réponses: 143 Q&As
Le test Juniper JN0-360 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test Juniper JN0-360. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.
Le test Juniper JN0-360 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test Juniper JN0-360. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.
Dans cette Industrie IT intense, le succès de test Juniper JN0-360 peut augmenter le salaire. Les gens d'obtenir le Certificat Juniper JN0-360 peuvent gagner beaucoup plus que les gens sans Certificat Juniper JN0-360. Le problème est comment on peut réussir le test plus facile?
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Juniper JN0-360.
Pass4Test est un seul site de provider le guide d'étude Juniper JN0-360 de qualité. Peut-être que vous voyiez aussi les Q&A Juniper JN0-360 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
JN0-360 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-360.html
NO.1 You have been asked to define a default gateway for traffic leaving a router. This route should use
interface so-0/0/0 as its next-hop.Which type of route would be suited for this scenario?
A.a static route
B.a generated route
C.a martian route
D.an aggregate route
Answer: A
Juniper examen JN0-360 JN0-360 examen certification JN0-360 JN0-360 examen JN0-360
NO.2 You have been asked to configure an IPv6 address for a group of interfaces that could belong on
different routers. If a packet is sent to that address, it should be received by all routers in the group.
Which address type would be suited for these requirements?
A.Unicast
B.Multicast
C.Anycast
D.Broadcast
Answer: B
Juniper JN0-360 JN0-360 examen certification JN0-360 certification JN0-360
NO.3 Which IS-IS packet is used to determine the level of an IS-IS neighbor?
A.IIH
B.LSP
C.PSNP
D.CSNP
Answer: A
Juniper certification JN0-360 JN0-360 examen certification JN0-360
NO.4 Router A is an OSPF router connected to both Area 0 and Area 1 Area 1 has been configured as a stub
area Which two LSA types does Router A suppress from Area 1 ?
A.Router LSA
B.External LSA
C.Summary LSA
D.ASBR Summary LSA
Answer: B D
Juniper examen certification JN0-360 JN0-360 examen certification JN0-360
NO.5 Which two statements describe differences between IPv4 and IPv6.? (Choose two)
A.IPsec is built into IPv6
B.IPv6 uses a 32-bit (4-byte) address and can support up to 4,294,967,296 addresses
C.IPv4 supports extension headers whereas IPv6 options are integrated into the base
D.IPv6 eliminates the need for NAT
Answer: AD
certification Juniper JN0-360 certification JN0-360 JN0-360
NO.6 What are two valid actions that can be applied to a frame by a Layer 2 firewall filter?
(Choose two)
A.Log
B.loss-priority
C.sample
D.count
Answer: BD
Juniper JN0-360 examen JN0-360 certification JN0-360
NO.7 You are logged into a router and have navigated to the (edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 10.10.10.1 as its primary next-hop and 10.10.10.5
as its secondary next-hop.
Which command correctly configures this scenario?
A.set static route 8/8 10.10.10.1 qualified-next-hop 10.10.10.5 pref 10
B.set static route 8/8 next-hop 10.10.10.1 secondary-next-hop 10.10.10.5 preference 10
C.set static route 8/8 next-hop 10.10.10.1 qualified-next-hop 10.10.10.5 preference 10
D.set static route 8/8 next-hop [10.10.10.1 10.10.10.5] pref 10
Answer: C
Juniper certification JN0-360 JN0-360 JN0-360 examen
NO.8 You must configure an OSPF area that does not accept type 3 link-state advertisements (LSAs) from
area 0 (other than the default route) You have configured your area to be stub, but you still see type 3
LSAs.
What will account for this behavior?
A.You should have configured your area as totally stubby
B.You should have used a not-so-stubby-area
C.You are experiencing a routing loop
D.You have exported routes into OSPF
Answer: A
Juniper examen JN0-360 JN0-360 JN0-360 JN0-360 examen JN0-360
NO.9 What is the function of the hop limit field in the IPv6 header?
A.It limits the diameter of the network to 20 hops
B.It sets the number of hops in the network to be equal to the MPLS header time-to-live (TTL)
C.It replaces the time-to-live (TTL) field in IPv4
D.It represents future extensibility to the protocol
Answer: C
certification Juniper JN0-360 examen JN0-360 JN0-360
NO.10 Which two values displayed in the output from the show spanning-tree MSTP configuration command
must match on all switches participating in the same MSTP region? (Choose two)
A.root bridge identifier
B.authentication checksum
C.context identifier
D.configuration digest
Answer: CD
Juniper examen JN0-360 examen JN0-360 JN0-360 examen JN0-360 examen
NO.11 Click the Exhibit button
In the exhibit, OSPF routers R1, R2, R3, and R4 come up, in order, at 1-minute intervals
Which router will be the designated router?.
A.R1
B.R2
C.R3
D.R4
Answer: A
certification Juniper JN0-360 JN0-360 JN0-360
NO.12 Click the Exhibit button
You work for the regional Internet service provider shown in the exhibit You have a partial BGP table and
are receiving a 10 100/16 route from your upstream ISP You have been asked to configure a default route
that can be sent to your downstream customer This route should forward customer traffic toward your
upstream Tier 11SP as long as the 10.100/16 route is present.
What would accomplish this goal?
A.Create and announce an aggregate default route
B.Create and announce a static default route with a next-hop of discard
C.Create and announce a static default route with a next-hop of reject
D.Create and announce a generated default route
E.Create an advertise-map with exist-map
Answer: E
Juniper JN0-360 JN0-360 examen JN0-360 examen JN0-360 examen
NO.13 Which role does the router ID (RID) have in the BGP route selection process?
A.The router ID is evaluated immediately after MED to determine route preference
B.The router ID is evaluated last in the route selection process
C.The router ID is evaluated after the cluster length and a lower router ID is chosen
D.The router ID is evaluated after analyzing the IGP metric cost
Answer: C
certification Juniper JN0-360 examen JN0-360 JN0-360
NO.14 Click the Exhibit button
Based on the illustration of the VPLS topology shown in the exhibit, which statement is true?
A.PE-C must have a spanning-tree protocol enabled
B.CE-C must have BGP enabled
C.Traffic forwarded from PE-C to PE-A is forwarded on to PE-B
D.Traffic forwarded from PE-C to PE-A is not forwarded on to PE-B
Answer: D
Juniper examen JN0-360 examen JN0-360
NO.15 You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 43 18 7 1 as its primary next-hop and 76 1310 2 as
its secondary next-hop.
Which command correctly configures this setup?
A.set static route 0/0 76.13.10.2 qualified-next-hop 43.18.7.1 pref 10
B.set static route 0/0 next-hop 43.18.7.1 secondary-next-hop 76.13.10.2 preference 10
C.set static route 0/0 next-hop [76.13.10.2 10.10.10.5] pref 10
D.set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10
Answer: D
Juniper JN0-360 examen JN0-360
NO.16 Which Junos operational mode command is used to verify that load balancing is working as expected?
A.show route all
B.show route extensive
C.show route balancing
D.show route forwarding-table
Answer: D
certification Juniper JN0-360 JN0-360
NO.17 Click the Exhibit button
Referring to the network illustrated in the exhibit, how does router A reach destinations in area 49.2222?
A.Router A will use the routes from area 49.2222; it learns from router B
B.Router A will see the attached bit from router B and create a default route
C.Router A must have a default route manually configured
D.Router A will receive a default route in the IS-IS update from router B
Answer: B
Juniper JN0-360 certification JN0-360 JN0-360 JN0-360 examen
NO.18 Which BGP state denotes a fully operational session?
A.Established
B.Active
C.Operational
D.Connect
Answer: A
Juniper certification JN0-360 JN0-360 examen JN0-360 examen
NO.19 You have configured an IP-IP tunnel between Router A and Router B
Which Junos operational mode command is used to verify that the tunnel interface is up and operational?
A.show chassis tunnel status
B.show tunnel interface
C.show interfaces terse
D.show interfaces tunnel
Answer: C
Juniper JN0-360 JN0-360
NO.20 You have recently implemented a graceful Routing-Engine switchover (GRES) and want to further
reduce down time if a Routing Engine (RE) failure occurs.
Which two features can be configured on this device to reduce its downtime in this situation? (Choose
two)
A.VRRP
B.GR
C.BFD
D.NSR
Answer: B D
Juniper JN0-360 JN0-360 certification JN0-360 JN0-360
Pour vous laisser savoir mieux que la Q&A Juniper JN0-360 produit par Pass4Test est persuadante, le démo de Q&A Juniper JN0-360 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Juniper JN0-360 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.
没有评论:
发表评论