Vous aurez une assurance 100% à réussir le test CWAP PW0-270 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
Un bon choix de l'outil à se former est le point essentiel à passer le test CWAP PW0-270, et les documentations à propos de rechercher le test CWAP PW0-270 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test CWAP PW0-270 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A CWAP PW0-270 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test CWAP PW0-270 plus facilement avec la Q&A de Pass4Test.
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat CWAP PW0-270. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test CWAP PW0-270. Choisir le produit de Pass4Test particulier pour le test Certification CWAP PW0-270 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
Code d'Examen: PW0-270
Nom d'Examen: CWAP (Certified Wireless Analysis Professional)
Questions et réponses: 60 Q&As
Pass4Test est un catalyseur de votre succès de test CWAP PW0-270. En visant la Certification de CWAP, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test CWAP PW0-270, la Q&A CWAP PW0-270 est un bon choix pour vous.
Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de CWAP après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
PW0-270 Démo gratuit à télécharger: http://www.pass4test.fr/PW0-270.html
NO.1 Using the exhibit as a reference, answer the following.
STA1 sent a data frame to Mesh AP2 destined for a local file server on the same subnet with MAC
address 00:11:22:33:44:55. Mesh AP2's mesh forwarding algorithm determined that the frame should be
forwarded through Mesh AP1.
In the frame sent from Mesh AP2 to Mesh AP1, what is true of the contents of the MAC header? (Choose
3)
A. SA = Mesh AP2's MAC Address
B. RA = Mesh AP1's MAC Address
C. TA = STA1's MAC Address
D. DA = 00:11:22:33:44:55
E. To DS = 0
F. From DS = 1
Answer: B,D,F
CWAP certification PW0-270 PW0-270 examen
NO.2 According to 802.11-2007, in what frame type(s) might you find the PMK Count and PMKID List fields?
A. All frames that include the RSN IE
B. Only (Re)Association Request frames
C. Beacon and Probe Response frames
D. EAPoL 4-Way Handshake frames
E. Authentication and Association Request and Response frames
Answer: B
CWAP PW0-270 examen PW0-270 PW0-270
NO.3 Which statements are true regarding Beacons from an AP in an HT infrastructure BSS that is configured
with multiple WLAN profiles? (Choose 3)
A. Beacons can be disabled for security purposes.
B. The BSSID and Source Address are always the same.
C. The Destination Address is always FF:FF:FF:FF:FF:FF.
D. The Receiver address and the BSSID are always the same.
E. When the SSID is "hidden," the ESS subfield of the Capability Information field distinguishes one BSS
from another.
F. All Beacons generated by APs contain a TIM information element.
G. The Beacon interval must be the same for all WLANs (SSIDs) supported by a single AP
Answer: B,C,F
CWAP certification PW0-270 PW0-270 PW0-270
NO.4 In the frame decode shown, there are two sets of supported data rates. 1, 2, 5.5, and 11 Mbps are all
shown as "basic" data rates, and 6, 9, 12, 18, 24, 36, 48, and 54 Mbps are shown simply as supported
data rates.
What is true of "basic" data rates in this context?
A. The AP requires all client stations to support Basic rates in order to associate to its BSS.
B. The highest data rate set to Basic is automatically used to send broadcast traffic such as Beacon
frames.
C. Basic rates are optional data rates for the BSS, often used for assuring connectivity for legacy stations.
D. Basic rates are only used for multicast traffic, and do not affect unicast traffic.
E. Basic rates are defined in an AP's service set to specify mandatory data rates for all retry frames.
Answer: A
certification CWAP certification PW0-270 PW0-270
NO.5 What is the purpose of a PHY preamble.?
A. It provides the receiver(s) with an opportunity for RF channel synchronization prior to the start of the
PLCP header.
B. It communicates important information about the PSDU's length, rate, and upper layer protocol-related
parameters.
C. It provides a cyclic redundancy check (CRC) for the receiving station to validate that the PLCP header
was received correctly.
D. It indicates to the PHY the modulation that shall be used for transmission (and reception) of the PSDU.
Answer: A
CWAP PW0-270 certification PW0-270 PW0-270 examen certification PW0-270 certification PW0-270
NO.6 Which statement is true regarding the Association Identifier (AID) used in IEEE 802.11 WLANs?
A. The AID has a maximum value of 2048, and is used to uniquely identify a wireless client station
associated with an access point.
B. The AID has a maximum value of 2007, and resides in the duration/ID field of a PS-Poll frame.
C. The client station is assigned an AID value in the 802.11 authentication response frame.
D. The AID field is present only in Beacons frames.
E. The AID is used by the access point in EDCA mode to reduce duplicate transmissions when sending
multicasts.
Answer: B
CWAP examen PW0-270 PW0-270 certification PW0-270 certification PW0-270
NO.7 In which 802.11 frames is the SSID present, provided the SSID is not removed through proprietary
software configuration by an administrator? (Choose 3)
A. Association Request
B. Reassociation Request
C. Probe Response
D. Disassociation
E. Authentication
F. Association Response
Answer: A,B,C
certification CWAP PW0-270 PW0-270 examen PW0-270 examen
NO.8 What HT PPDU format is shown in the exhibit?
A. HT-mixed format
B. HT-greenfield format
C. Non-HT format
D. Non-HT duplicate format
E. Dual Training Field format
F. ERP-OFDM format
Answer: A
CWAP certification PW0-270 PW0-270 examen
NO.9 When a 5 GHz HT station in a 40 MHz BSS desires to protect a 40 MHz transmission from an OFDM
station using an RTS/CTS or CTS-to-Self exchange, what frame format is used for the RTS and/or CTS
frames?
A. HT-mixed format
B. HT-greenfield format
C. Dual-CTS
D. Non-HT Duplicate
E. Phased Coexistence PPDU
Answer: D
CWAP certification PW0-270 certification PW0-270 certification PW0-270
NO.10 What IEEE 802.11 technology is illustrated by the exhibit?
A. Fragmentation
B. TCP Fragment Bursting
C. A-MSDU
D. A-MPDU E. U-APSD
F. Jumbo frames
Answer: C
CWAP examen PW0-270 examen PW0-270 PW0-270
Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test CWAP PW0-270. Ajoutez la Q&A au panier.
没有评论:
发表评论