Pass4Test possède un l'outil de formation particulier à propos de test Symantec ST0-090. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation Symantec ST0-090 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Symantec ST0-090, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Symantec ST0-090. Peut-être d'obtenir le Certificat Symantec ST0-090 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
Vous aurez une assurance 100% à réussir le test Symantec ST0-090 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Symantec ST0-090. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Symantec ST0-090. Choisir le produit de Pass4Test particulier pour le test Certification Symantec ST0-090 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.
Code d'Examen: ST0-090
Nom d'Examen: Symantec (Symantec control compliance suite 10.0)
Questions et réponses: 156 Q&As
ST0-090 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-090.html
NO.1 A Data Collection job fails for a Windows machine in Control Compliance Suite 10.0 (CCS). All
components appear to have been correctly installed and configured in the console. What is an initial step
to take outside of the CCS Console (Reporting and Analytics) to troubleshoot the issue?
A. restart Symantec RMS Process Manager
B. run a bv-Control for Windows query
C. recreate the Credentials database
D. verify the Enterprise Configuration Service
Answer: B
Symantec certification ST0-090 ST0-090 examen
NO.2 In order to use Response Assessment Module results as policy evidence in Control Compliance Suite
(CCS), which two statements are correct? (Select two.)
A. The policy and question must be mapped to the same control statement.
B. The same CCS asset must be part of the policy and the questionnaire.
C. The questionnaire and policy evaluation must be performed simultaneously.
D. The Content Studio must be mapped to the RAM server.
E. The user must be assigned the data owner role to validate the result.
Answer: A, B
certification Symantec ST0-090 examen ST0-090 examen ST0-090
NO.3 A Standards Evaluation has completed and is ready to be viewed. What are two view options.? (Select
two.)
A. Risk-based view
B. Compliance-based view
C. Asset-based view
D. Failure-based view
E. Standard-based view
Answer: C, E
Symantec ST0-090 ST0-090
NO.4 Which function of Control Compliance Suite 10.0 is responsible for generating tiered dashboards?
A. DPS Evaluator
B. DPS Reporter
C. Application server
D. Directory server
Answer: B
Symantec examen ST0-090 certification ST0-090
NO.5 Which two statements accurately describe the purpose of the Control Compliance Suite Production
database? (Select two.)
A. It stores the data that is collected from the assets.
B. It stores data specific to individual dashboards.
C. It stores the results of evaluation jobs.
D. It stores data specific to individual reports.
E. It stores evidence gathered from the extended evidence sources.
Answer: A, C
certification Symantec ST0-090 examen certification ST0-090 ST0-090 examen
NO.6 Which database do the dashboards pull data from?
A. Production database
B. Reporting database
C. Evidence database
D. Master database
Answer: B
Symantec ST0-090 certification ST0-090
NO.7 What are two available formats for exporting reports from the Control Compliance Suite 10.0 Reporting
and Analytics Console? (Select two.)
A. Comma Separated Values (CSV)
B. Portable Document Format (PDF)
C. Crystal Reports (RPT)
D. Microsoft PowerPoint (PPT)
E. Microsoft Access (MDB)
Answer: B, C
certification Symantec ST0-090 ST0-090 ST0-090 examen ST0-090
NO.8 A single Data Processing Service (DPS) Reporter is assigned to perform database synchronization
between which two databases? (Select two.)
A. Reporting database
B. Evidence database
C. Credentials database
D. Production database
E. Master database
Answer: A, D
certification Symantec certification ST0-090 certification ST0-090 ST0-090 examen
NO.9 When an administrator of Control Compliance Suite 10.0 views the results of an evaluation against a
standard, both the risk score and the compliance score are high. How can these evaluation results be
explained?
A. Multiple sections contain failures.
B. The risk score tracks critical failures.
C. Many exceptions have been approved.
D. The compliance score tracks informational items.
Answer: C
Symantec examen certification ST0-090 certification ST0-090
NO.10 Which Control Compliance Suite component automates the analysis of procedural controls?
A. Standards Module
B. Entitlements Module
C. Policy Module
D. Response Assessment Module
Answer: D
Symantec examen ST0-090 certification ST0-090 ST0-090 ST0-090 examen
NO.11 Which two actions can be taken on a predefined report in the Control Compliance Suite 10.0 Console?
(Select two.)
A. Move
B. Delete
C. Copy
D. Export Report Template
E. Paste
Answer: C, D
Symantec examen ST0-090 ST0-090 ST0-090 examen ST0-090
NO.12 What must be done before the Control Compliance Suite 10.0 can use a newly installed Data
Processing Service (DPS)?
A. synchronize settings on all registered DPS hosts
B. register the DPS with the Application server
C. set all values of the common fields with reconciliation rules
D. import primary assets
Answer: B
certification Symantec ST0-090 examen certification ST0-090 ST0-090
NO.13 In terms of securing systems and configurations, Control Compliance Suite 10.0 performs which two
functions? (Select two.)
A. performs event correlation on security logs
B. identifies high risk systems and configurations
C. scans content of servers for confidential information
D. provides guidance for and measures effectiveness against industry standards
E. proactively blocks threats from penetrating critical systems
Answer: B, D
Symantec ST0-090 examen ST0-090 ST0-090 examen ST0-090 ST0-090
NO.14 An administrator wants to ensure that issues flagged as out of compliance are addressed as efficiently
as possible. The administrator wants to trigger the remediation process. Where is the remediation option
set?
A. within the Evaluation Job Wizard
B. within the Standard specification
C. on the Asset Properties page
D. on the Reporting page
Answer: A
certification Symantec certification ST0-090 ST0-090 examen ST0-090 ST0-090
NO.15 Asset Import jobs from a particular site are running more slowly than Asset Import jobs from other sites.
What is the most likely cause?
A. The Application server service is untrusted for delegation.
B. One of the DPS Collectors from the site has failed.
C. The Reporting Database Synchronization job has failed.
D. Service Principal Names (SPNs) are configured incorrectly.
Answer: B
Symantec ST0-090 ST0-090 ST0-090 examen
NO.16 What is required for the Control Compliance Suite 10.0 Application server and Directory server
components to support Kerberos authentication in an Active Directory environment?
A. username and password
B. configured PKI certificates
C. configured Service Principal Names (SPNs)
D. successful sync configuration
Answer: C
Symantec examen ST0-090 certification ST0-090 certification ST0-090 certification ST0-090 certification ST0-090
NO.17 The Response Assessment Module Web Service application pool account must be a member of which
group?
A. Administrators
B. IIS_WPG
C. RAM_Administrators
D. Distributed COM Users
Answer: B
Symantec examen certification ST0-090 ST0-090
NO.18 A Control Compliance Suite 10.0 user schedules a Policy Acceptance report. After the Report job
finishes, the user opens the results and receives the message: 'No data available to generate this report.'
The user is sure that certain people have already accepted policies this morning. What should the user do
in order to get the data in the report?
A. run the Report Generation job again
B. run the Policy and Mandates Metrics Computation job
C. run the Report Data Purge job
D. run the Report Data Synchronization job
Answer: D
Symantec certification ST0-090 ST0-090 examen ST0-090 certification ST0-090
NO.19 Within an evaluation result, the status 'Unknown' is primarily defined with which check setting?
A. missing data items
B. heck ex ression
C. precondition
D. post-processing expression
Answer: A
certification Symantec ST0-090 ST0-090 examen ST0-090 certification ST0-090
NO.20 An administrator troubleshooting the Symantec Control Compliance system notices that both the
Application server and the Directory server failed to start. The administrator verifies that Windows started
normally on the two servers. What is the next step the administrator should take?
A. verify that the Active Directory server is running
B. ping the load balancer from the Application server
C. verify that the Information server is running
D. verify internet access from the Directory server
Answer: D
Symantec examen ST0-090 examen certification ST0-090
Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.
没有评论:
发表评论