Microsoft 70-411 examen pratique questions et réponses

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.

Le test Certificat Microsoft 70-411 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Microsoft 70-411. Vous allez prendre toutes essences du test Microsoft 70-411 dans une courte terme.

Le produit de Pass4Test peut assurer les candidats à réussir le test Microsoft 70-411 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Le test simulation Microsoft 70-411 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Microsoft 70-411 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Microsoft 70-411 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test Microsoft 70-411 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification Microsoft 70-411.

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Microsoft 70-411. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de 70-411, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Code d'Examen: 70-411
Nom d'Examen: Microsoft (Administering Windows Server 2012)
Questions et réponses: 238 Q&As

70-411 Démo gratuit à télécharger: http://www.pass4test.fr/70-411.html

NO.1 Your network contains an Active Directory domain named contoso.com. All servers run
Windows Server 2012. All sales users have laptop computers that run Windows 8. The sales
computers are joined to the domain. All user accounts for the sales department are in an
organizational unit (OU) named Sales_OU. A Group Policy object (GPO) named GPO1 is linked to
Sales_OU. You need to configure a dial-up connection for all of the sales users. What should you
configure from User Configuration in GPO1?
A. Policies/Admin1strative Templates/Network/Windows Connect Now
B. Policies/Admin1strative Templates/Windows Components/Windows Mobility Center
C. Preferences/Control Panel Settings/Network Options
D. Policies/Admin1strative Templates/Network/Network Connections
Answer: C

Microsoft   70-411 examen   certification 70-411   70-411
Explanation/Reference:
http://technet.microsoft.com/en-us/library/cc772107.aspx
To create a new Dial-Up Connection preference item
Open the Group Policy Management Console. Right-click the Group Policy object (GPO) that should
contain the new preference item, and then click Edit.
In the console tree under Computer Configuration or User Configuration, expand the Preferences
folder, and then expand the Control Panel Settings folder.
Right-click the Network Options node, point to New, and select Dial-Up Connection.

NO.2 HOTSPOT
Your network contains an Active Directory domain named contoso.com. All servers run Windows
Server 2012. The domain contains an organizational unit (OU) named FileServers_OU.
FileServers_OU contains the computer accounts for all of the file servers in the domain. You need to
audit the users who successfully access shares on the file servers. Which audit category should you
configure? To answer, select the appropriate category in the answer area.
Answer:

NO.3 You have a server named Admin1 that runs Windows Server 2012. Admin1 has the File Server
Resource Manager role service installed. Admin1 has a folder named Folder1 that is used by the
human resources department. You need to ensure that an email notification is sent immediately to
the human resources manager when a user copies an audio file or a video file to Folder1. What
should you configure on Admin1?
A. A file screen
B. A file screen exception
C. A file group
D. A storage report task
Answer: A

certification Microsoft   70-411 examen   70-411 examen   70-411

NO.4 HOTSPOT
Your network contains an Active Directory domain named contoso.com. You have several Windows
PowerShell scripts that execute when users log on to their client computer. You need to ensure that
all of the scripts execute completely before the users can access their desktop. Which setting should
you configure? To answer, select the appropriate setting in the answer area.
Answer:

NO.5 Your network contains an Active Directory domain named contoso.com. The domain contains
two servers named Admin1 and Server2. Both servers run Windows Server 2012. Both servers have
the File and Storage Services server role, the DFS Namespaces role service, and the DFS Replication
role service installed. Admin1 and Server2 are part of a Distributed File System (DFS) Replication
group named Group1. Admin1 and Server2 are separated by a low-speed WAN connection. You
need to limit the amount of bandwidth that DFS can use to replicate between Admin1 and Server2.
What should you modify?
A. The cache duration of the namespace
B. The staging quota of the replicated folder
C. The referral ordering of the namespace
D. The schedule of the replication group
Answer: D

Microsoft examen   70-411   70-411 examen   70-411

NO.6 Your network contains an Active Directory domain named contoso.com. The domain contains
a domain controller named DC1 that runs Windows Server 2012. You have a Group Policy object
(GPO) named GPO1 that contains several custom Administrative templates. You need to filter the
GPO to display only settings that will be removed from the registry when the GPO falls out of scope.
The solution must only display settings that are either enabled or disabled and that have a comment.
How should you configure the filter? To answer, select the appropriate options below. Select three.
A. Set Managed to: Yes
B. Set Managed to: No
C. Set Managed to: Any
D. Set Configured to: Yes
E. Set Configured to: No
F. Set Configured to: Any
G. Set Commented to: Yes
H. Set Commented to: No
I. Set Commented to: Any
Answer: AFG

Microsoft   70-411 examen   certification 70-411
Explanation/Reference:
A: Set Managed to: Yes There are two kinds of Administrative Template policy settings: Managed
and Unmanaged. The Group Policy Client service governs Managed policy settings and removes a
policy setting when it is no longer within scope of the user or computer.
F: Set Configured tO: Any We want to display both settings that are enable and disabled.
G: Set Commented to: Yes Only settings that are commented should be displayed. Note: Filter with
Property Filters The Local Group Policy Editor allows you to change the criteria for displaying
Administrative Template policy settings. By default, the editor displays all policy settings, including
unmanaged policy settings. However, you can use property filters to change how the Local Group
Policy Editor displays Administrative Template policy settings. There are three inclusive property
filters that you can use to filter Administrative Templates. These property filters include:
*Managed
*Configured
*Commented

NO.7 Your network contains an Active Directory domain named contoso.com. The domain contains
a file server named Admin1 that runs Windows Server 2012. You view the effective policy settings
of Admin1 as shown in the exhibit. (Click the Exhibit button.)
On Admin1, you have a folder named C:\Share1 that is shared as Share1. Share1 contains
confidential data. A group named Group1 has full control of the content in Share1. You need to
ensure that an entry is added to the event log whenever a member of Group1 deletes a file in
Share1. What should you configure?
A. The Audit File System setting of Servers GPO
B. The Sharing settings of C:\Share1
C. The Security settings of C:\Share1
D. The Audit File Share setting of Servers GPO
Answer: C

Microsoft   certification 70-411   70-411 examen   70-411 examen

NO.8 Your network contains an Active Directory domain named contoso.com. The domain contains
a server named Admin1 that runs Windows Server 2012. Admin1 has the File Server Resource
Manager role service installed. You configure a quota threshold as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that a user named User1 receives an email notification when the threshold is
exceeded. What should you do?
A. Configure the File Server Resource Manager Options.
B. Modify the members of the Performance Log Users group.
C. Create a performance counter alert.
D. Create a classification rule.
Answer: A

Microsoft   70-411 examen   70-411

NO.9 Your network contains an Active Directory domain named contoso.com. The functional level of
the forest is Windows Server 2008 R2. Computer accounts for the marketing department are in an
organizational unit (OU) named Departments\Marketing\Computers. User accounts for the
marketing department are in an OU named Departments\Marketing\Users. All of the marketing
user accounts are members of a global security group named MarketingUsers. All of the marketing
computer accounts are members of a global security group named MarketingComputers. In the
domain, you have Group Policy objects (GPOs) as shown in the exhibit. (Click the Exhibit button.)
You create two Password Settings objects named PSO1 and PSO2. PSO1 is applied to MarketingUsers.
PSO2 is applied to MarketingComputers. The minimum password length is defined for each policy as
shown in the following table.
You need to identify the minimum password length required for each marketing user. What should
you identify?
A. 5
B. 6
C. 7
D. 10
E. 12
Answer: D

Microsoft   70-411 examen   70-411 examen   70-411   70-411

NO.10 Your network contains an Active Directory domain named contoso.com. The domain contains
five servers. The servers are configured as shown in the following table.
All desktop computers in contoso.com run Windows 8 and are configured to use BitLocker Drive
Encryption (BitLocker) on all local disk drives. You need to deploy the Network Unlock feature. The
solution must minimize the number of features and server roles installed on the network. To which
server should you deploy the feature?
A. Server3
B. Server5
C. Server1
D. Server2
E. Server4
Answer: B

Microsoft   70-411 examen   70-411   70-411

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Microsoft 70-411. Le guide d'étude de Pass4Test comprend les excercices de Microsoft 70-411 et la Q&A qui peut vous permetrre à réussir 100% le test Microsoft 70-411. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.