Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Microsoft après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
Les produits de Pass4Test sont préparés pour le test Certification Microsoft 070-487, y compris les formations et les informations ciblées au test Microsoft 070-487. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Microsoft 70-649 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.
Code d'Examen: 70-649
Nom d'Examen: Microsoft (TS: Upgrading Your MCSE on Windows Server 2003 to Windows Server 2008, Technology Specialist)
Questions et réponses: 278 Q&As
Code d'Examen: 070-487
Nom d'Examen: Microsoft (Developing Windows Azure and Web Services)
Questions et réponses: 63 Q&As
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Microsoft 70-649 sans aucune doute si vous choisissez le Pass4Test.
L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Microsoft 070-487. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Microsoft 070-487.
70-649 Démo gratuit à télécharger: http://www.pass4test.fr/70-649.html
NO.1 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server
2008 R2. Routers on the network support multicast transmissions. A server named Server1 has the
Windows Deployment Services (WDS) server role installed. A custom Windows 7 image is available for
download from Server1. You need to deploy the image to 100 new computers by using multicast. The
solution must prevent computers that use low-bandwidth connections from slowing the deployment to
computers that use high-bandwidth connections. What should you do.?
A. Enable Auto-Cast.
B. Enable Scheduled-Cast.
C. From the WDS server properties, adjust the Transfer Settings.
D. From the WDS server properties, modify the Multicast IP Address settings.
Answer: C
Microsoft examen certification 70-649 certification 70-649 70-649 70-649
NO.2 Your network contains a Web server that runs Windows Server 2008 R2. Remote management is
configured for Internet Information Services (IIS). From IIS Manager Permissions, you add a user to a
Web site. You need to prevent the user from using Internet Information Services (IIS) Manager to modify
the authorization rules of the Web site. Which settings should you configure?
A. Authorization Rules
B. Feature Delegation
C. IIS Manager Permissions
D. IIS Manager Users
Answer: B
Microsoft examen certification 70-649 70-649 70-649
NO.3 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 has Remote Desktop Services Per Device client access licenses (RDS Per Device CALs)
installed. Server2 and Server3 are members of a Remote Desktop Connection Broker (RD Connection
Broker) farm. Four months after Server2 and Server3 are deployed, you discover that users can no longer
establish Remote Desktop sessions on Server3. You verify that Server3 is online and that all required
services on Server3 run properly. You verify that the users can establish Remote Desktop sessions on
Server2. You need to ensure that the users connecting to the RD Connection Broker farm can establish
sessions on Server3. What should you do?
A. On Server3, enable dedicated farm redirection.
B. On Server3, configure the Remote Desktop licensing settings.
C. On Server1, install additional RDS Per Device CALs.
D. On Server1, run the Manage RDS CALs wizard and click the Migrate action.
Answer: B
certification Microsoft 70-649 examen 70-649 examen 70-649 examen
NO.4 Your network contains a server named Server1 that has two volumes named C and D. You add a new
volume. You need to ensure that you can access data on the new volume by using the path D:\data. What
should you do?
A. From Disk Management, create a volume mount point.
B. From Disk Management, attach a virtual hard disk (VHD).
C. At the command prompt, run the diskraid.exe command and specify the /v parameter.
D. At the command prompt, run the dism.exe command and specify the /mount-wim parameter.
Answer: A
Microsoft examen certification 70-649 certification 70-649 certification 70-649
NO.5 Your network contains a server named Server1 that runs Windows Server 2008 R2. You plan to create
an image of Server1 to deploy to additional servers. You need to identify how many more times you can
rearm the Windows activation clock. What should you run on Server1?
A. msinfo32.exe
B. slmgr.vbs /dlv
C. slui.exe
D. winrm.vbs enumerate
Answer: B
certification Microsoft 70-649 examen certification 70-649 certification 70-649 certification 70-649
NO.6 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Gateway (RD Gateway) role service installed. You add the Domain Users group to a
connection authorization policy named TS_CAP_01. You need to ensure that only client computers that
have Windows Firewall enabled can connect to Remote Desktop resources through the RD Gateway.
What should you do?
A. From Remote Desktop Gateway Manager, modify the properties of the TS_RAP_01 resource
authorization policy.
B. From Remote Desktop Gateway Manager, modify the properties of the TS_CAP_01 connection
authorization policy.
C. From the Network Policy Server console, modify the properties of the TS_CAP_01 network policy.
D. From the Network Policy Server console, modify the properties of the TS GATEWAY AUTHORIZATION
POLICY connection request policy.
Answer: C
certification Microsoft 70-649 examen certification 70-649 certification 70-649
NO.7 Your network contains an Active Directory domain. The domain contains two servers named Server1
and Server2. You connect Server1 and Server2 to a logical unit number (LUN) on a Storage Area Network
(SAN). You need to ensure that you can use the LUN in a failover cluster. What should you do?
A. From Server Manager, run the Best Practices Analyzer.
B. From File Server Resource Manager, generate a storage report.
C. From Failover Cluster Manager, run the Validate a Configuration Wizard.
D. From Share and Storage Management, verify the advanced settings of the LUN.
Answer: C
certification Microsoft 70-649 examen 70-649 examen certification 70-649 70-649
NO.8 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Windows Deployment Services (WDS) server role and the Windows Automated Installation Kit (Windows
AIK)installed. You create a new x86 Microsoft Windows Preinstallation Environment (Windows PE) image
and add it as a boot image to Server1. You run the Create Capture Image wizard and receive the following
error message: "The Windows Deployment Services Image Capture Wizard could not be located in the
specified Windows PE image." You need to ensure that you can create a capture image by using the
Create Capture Image wizard. What should you do first?
A. Create an x64 Windows PE image and add the image to Server1 as a boot image.
B. Add a new boot image to Server1 and specify the Sources\Boot.wim file from the Windows Server
2008 R2 installation media.
C. Mount the Windows PE boot image and add the contents of the% program Files%\Windows
AIK\Tools\amd64 folder to the image.
D. Mount the Windows PE boot image and add the contents of the %program Files%\Windows
AIK\Tools\PE Tools folder to the image.
Answer: B
certification Microsoft 70-649 examen 70-649 examen 70-649 certification 70-649
没有评论:
发表评论