Pour réussir le test EMC E20-080 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test EMC E20-080. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test EMC E20-080 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification EMC E20-080. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Pass4Test peut offrir nombreux de documentations aux candidats de test EMC E20-080, et aider les candidats à réussir le test. Les marétiaux visés au test EMC E20-080 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test EMC E20-080 100%.
Code d'Examen: E20-080
Nom d'Examen: EMC (Network Storage - SAN Implementation)
Questions et réponses: 210 Q&As
Votre vie changera beaucoup après d'obtenir le Certificat de EMC E20-080. Tout va améliorer, la vie, le boulot, etc. Après tout, EMC E20-080 est un test très important dans la série de test Certification EMC. Mais c'est pas facile à réussir le test EMC E20-080.
Le Certificat de EMC E20-080 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification EMC E20-080, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test E20-080 sans aucun éffort, en même temps, le test de EMC E20-080 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test EMC E20-080 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
Le test EMC E20-080 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test EMC E20-080. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.
Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification EMC E20-080, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test EMC E20-080.
E20-080 Démo gratuit à télécharger: http://www.pass4test.fr/E20-080.html
NO.1 What is the maximum number of CLARiiON Source systems that can be mirrored to one
Target system?
A. 16
B. 4
C. 2
D. 8
Answer: B
EMC E20-080 E20-080 E20-080
NO.2 Which of the following statements is true regarding active zone sets in ControlCenter?
A. Associate an active zone set with multiple fabrics or VSANs at once.
B. Place a copy of an active zone set in the Planned Zone Sets folder for
activation/modification.
C. Directly modify an active zone set.
D. Directly delete an active zone set.
Answer: B
EMC examen E20-080 examen E20-080 examen
NO.3 Which of the following Celerra replication options offers synchronous replication over
campus distances for disaster recovery?
A. TimeFinder/FS SRDF/NearCopy
B. TimeFinder/FS SnapSure
C. TimeFinder/FS Snapcopy
D. TimeFinder/FS SRDF/FarCopy
Answer: A
EMC E20-080 certification E20-080 certification E20-080 E20-080 examen
NO.4 Which of the following sequences would ensure that an I/O is completed when a HBA on
a host with PowerPath fails when the I/O is being driven through it?
A. PowerPath receives I/O timeout, drives I/O through an alternate path, and takes the
failed path offline
B. PowerPath receives I/O timeout, takes the failed path offline and drives I/O through an
alternate path
C. PowerPath takes the failed path offline, drives I/O through an alternate path, and
receives I/O timeout
D. PowerPath takes the failed path offline, receives I/O timeout and drives I/O through an
alternate path
Answer: B
EMC examen certification E20-080 E20-080 certification E20-080 E20-080
NO.5 Which two of the following can you use to allocate CLARiiON LUNs to a server?
(Choose two.)
A. Connectrix Manager
B. TimerFinder
C. ESN Manager
D. Navisphere Manager
E. ControlCenter
F. TimeFinder/Snap
Answer: D,E
EMC examen E20-080 certification E20-080 E20-080
NO.6 Which of the following web interfaces can be used to manage standalone M-Series
switches?
A. Web interface is not available
B. EWS
C. Web Tools
D. Fabric Manager
Answer: B
EMC E20-080 examen E20-080 examen certification E20-080
NO.7 Which of the following statements is true?
A. Concurrent SRDF has the capability of dynamically defining relationships between
SRDF Source (R1) and Target (R2) devices
B. Concurrent SRDF has the ability to use both RAF processors for Fibre Channel host
connections
C. Concurrent SRDF enables SRDF between Symmetrix systems using Fibre Channel
switches
D. With concurrent SRDF, a single SRDF Source device (R1) can be simultaneously
paired with two SRDF Target devices (R2)
Answer: D
EMC certification E20-080 certification E20-080 E20-080 examen certification E20-080
NO.8 Which two of the following are iSCSI naming conventions? (Choose two.)
A. EUI
B. iQN
C. iSNS
D. DNS
Answer: A,B
EMC examen E20-080 E20-080 certification E20-080 E20-080 E20-080
NO.9 Which of the following statements represents a feature of file level host storage access?
A. The host sees Logical Volumes as Physical Volumes
B. Data is accessed using NFS, CIFS, and FTP
C. The host typically has exclusive access to Logical Volumes
D. The storage system presents LUNs to hosts
Answer: B
EMC E20-080 examen E20-080
NO.10 Which two of the following are Celerra Replicator features?
A. Point-in-time copy over an IP network
B. Only sends Control Station configuration parameters over the IP network
C. Synchronous data recovery
D. Only sends changed data over the IP network
Answer: A,D
EMC examen E20-080 examen E20-080 E20-080 certification E20-080
NO.11 Which two of the following statements are features of CLARiiON Access Logix?
(Choose two.)
A. LUN masking requires the use of storage groups
B. The storage processors in the array do not share Access Logix databases
C. Hosts need to be connected to the storage group to perform LUN masking
D. Storage groups cannot be destroyed once created
Answer: A,C
EMC E20-080 E20-080
NO.12 Which of the following products can be used to create Logical Volumes on a Symmetrix
system?
A. ControlCenter Symmetrix Manager
B. VisualSRM
C. ControlCenter Automated Resource Manager
D. ControlCenter StorageScope
Answer: A
EMC E20-080 E20-080
NO.13 What is the purpose of storage groups in a CLARiiON storage array?
A. LUN expansion
B. LUN mirroring
C. LUN groups
D. LUN masking
Answer: D
EMC certification E20-080 E20-080 E20-080
NO.14 Which of the following protocols do open systems hosts use to access storage in Fibre
Channel SANs?
A. SCSI
B. ESCON
C. SNMP
D. FICON
Answer: A
EMC certification E20-080 E20-080 E20-080 examen certification E20-080 E20-080
NO.15 Which of the following is not a CLARiiON High Availability feature?
A. Dual consoles
B. Dual power supplies
C. Dual ported drives
D. Dual storage processors
E. Dual LCCs
Answer: A
EMC examen E20-080 E20-080 E20-080
NO.16 Which of the following statements best describes ControlCenter Autofixes?
A. Commands that can be run to fix a problem notification from an alert
B. Rules containing all of the general criteria for storage allocation requests
C. Groups of storage devices that SPS will search for available storage
D. A collection of Symmetrix devices used to query status and impart control operations
Answer: A
EMC E20-080 E20-080 examen certification E20-080
NO.17 Which of the following components are required in order to enable write caching in a
CLARiiON array?
A. 2 power supplies, 2 storage processors, 4 DAE shelves and at least one standby power
supply
B. 2 power supplies, 2 storage processors, 2 LCC cards and at least one standby power
supply
C. 2 power supplies, 4 storage processors, 2 LCC cards and at least one standby power
supply
D. 2 power supplies, 2 storage processors, 2 DAE shelves and at least one standby power
supply
Answer: B
EMC E20-080 certification E20-080 E20-080 examen
NO.18 Which of the following statements is true?
A. ControlCenter agent activity is policy-based and user-defined
B. ControlCenter agents can only be installed on the Repository server
C. All ControlCenter agents communicate with each other
D. ControlCenter agents tier handles data presentation
Answer: A
EMC certification E20-080 E20-080
NO.19 In the first step of the copy on first write mechanism used with Reserved LUN Pool, the
host sends a write request to the Source LUN. What is the next step?
A. The snapshot pointer is changed to chunk in Reserved LUN Pool
B. The original Source LUN data chunk is written to Reserved LUN Pool
C. The snapshot pointer writes to Reserved LUN Pool
D. The host data is written to Source LUN
Answer: B
EMC E20-080 E20-080 examen E20-080
NO.20 Which of the following is monitored by the ControlCenter storage agent?
A. Brocade switch
B. Legato Networker
C. CLARiiON
D. Windows 2000 disk
Answer: C
EMC E20-080 E20-080
NO.21 What is the purpose of the Performance Manager in ControlCenter?
A. It automatically allocates storage device to hosts
B. It splits and establishes with standard and Business Continuance Volume (BCV)
devices
C. It reports key historical performance data
D. It converts device types between standard and BCV
Answer: C
EMC E20-080 E20-080 examen E20-080
NO.22 Which of the following is monitored by the ControlCenter SAN agent?
A. Brocade switch
B. Windows 2000 disk
C. Legato Networker
D. CLARiiON
Answer: A
EMC examen E20-080 examen E20-080 E20-080
NO.23 In the first step of a read cache miss operation on a Symmetrix, the host sends a read
request. What is the next step?
A. The Channel Director checks the track table
B. The Channel Director sends data to the host
C. The Disk Director retrieves data
D. The Disk Director sends data to the host
Answer: A
certification EMC certification E20-080 certification E20-080 E20-080 E20-080
NO.24 Which of the following statements best describes a Fan-out Ratio for a SAN attached
array?
A. The qualified maximum number of initiators that can access a single Target port
through a SAN
B. The qualified maximum number of storage ports that can be attached to an initiator
port in a SAN
C. The qualified maximum number of storage ports that can be direct attached to a HBA
port in a SAN
D. The maximum number of HBA and storage ports that can be contained in a zone on a
switch
Answer: A
EMC examen E20-080 examen E20-080
NO.25 XXXX .com has a primary CX600 array and a secondary CX400 array. XXXX .com
wants to do data backup on the secondary site while the applications are still running on
the primary site. How can XXXX .com accomplish this goal?
A. Array types are not compatible
B. Admsnap and PowerPath
C. MirrorView and SnapView
D. MirrorView and Navisphere CLI
Answer: C
EMC E20-080 examen E20-080 examen E20-080
NO.26 Which of the following Windows-based applications in ControlCenter displays
Symmetrix performance for analysis?
A. Symmetrix Manager
B. StorageScope
C. TimeFinder/SRDF QoS
D. Performance Manager
Answer: D
EMC examen E20-080 examen E20-080 certification E20-080 E20-080
NO.27 Which of the following are configuration options on the NS600 Data Movers? (Choose
two.)
A. One Data Mover is primary, and one acts as a standby
B. All four (4) Data Movers are primary
C. Both Data Movers are primary
D. One Data Mover acts as a standby for the other three (3) Data Movers
Answer: A,C
certification EMC certification E20-080 E20-080 E20-080
NO.28 What is the default percentage of cache capacity at which high water mark cache flushing
is initiated in a CLARiiON system?
A. 80%
B. 92%
C. 55%
D. 75%
Answer: A
EMC examen certification E20-080 E20-080 E20-080
NO.29 Which two of the following are features of TimeFinder/Mirror Clone? (Choose two.)
A. Utilizes VDEVs
B. Copy on access to allow for instant access to data
C. Point in time copy of Standard or BCV device
D. Requires only a small fraction of Source volume capacity
Answer: B,C
EMC examen E20-080 certification E20-080
NO.30 Which of the following statements represents a feature of SnapView Clones?
A. Data can be made available to second host immediately; no synchronization required
B. Copy uses a fraction of Source LUN size
C. Copy requires same space as Source LUN
D. Data copy may be used as Source for backup application running on first host
Answer: C
certification EMC E20-080 E20-080
Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test EMC E20-080 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification EMC E20-080.
没有评论:
发表评论