La population de la Certification IBM 000-221 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
La partie plus nouvelle de test Certification IBM 000-221 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel IBM 000-221. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.
Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification IBM 000-221, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test IBM 000-221 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.
Code d'Examen: 000-221
Nom d'Examen: IBM (AIX 7 Administration )
Questions et réponses: 150 Q&As
Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification IBM 000-221 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.
Après une longue attente, les documentations de test IBM 000-221 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test IBM 000-221 à la première fois.
000-221 Démo gratuit à télécharger: http://www.pass4test.fr/000-221.html
NO.1 Which AIX command will display the virtual SCSI slot number that is the parent of hdisk0?
A. Isdev
B. Iscfg
C. Isattr
D. Ismap
Answer: B
IBM examen 000-221 000-221 examen 000-221
NO.2 How can an administrator enable the Workload Partitions Manager feature after AIX 7 has been
installed with the default options?
A. Change AIX License using chlicense -I command
B. Change AIX edition using chedition -e command
C. Change WPAR License using chwpar -I command
D. Change WPAR edition using chwpar-e command
Answer: B
certification IBM 000-221 000-221
NO.3 The cfgmgr command appears to be taking an excessive time to complete. The administrator was able
to quit the command and return to the command prompt. The administrator does not have access to the
managing HMC and unable to check for any LED codes.
How else can the cause of the observed delay be determined?
A. Review the latest entry within /var/log/cfgdb.out.
B. Start the syslog daemon before re-issuing the command.
C. Re-issue the command with the W flag.
D. Initiate the ledmon command from a separate session, then re-issue cfgmgr.
Answer: C
IBM 000-221 examen 000-221 000-221
NO.4 How can an administrator disable Role Based Access Control (RBAC) in a WPAR?
A. Run chattr -E -I sys0 -a enhanced_RBAC=false Reboot the WPAR
B. Run the RBAC wizard and deselect 'Enable RBAC Reboot the system
C. Run chdev -I mywpar -a enhanced_RBAC=false Reboot the Global Environment
D. Run chwpar -a RBAC=false Reboot the WPAR
Answer: C
certification IBM 000-221 000-221 000-221 000-221
NO.5 Which of the following is an AIX 7 Cluster Aware feature?
A. Cluster application load balancing
B. Cluster shared volume groups on the shared disk
C. Cluster IP addresses on the shared resource
D. Cluster configurations on the cluster repository disk
Answer: D
certification IBM 000-221 000-221 examen 000-221
NO.6 Before changing virtual memory settings, how can an administrator check the valid range of values for
a tuning parameter?
A. Iscfg-T
B. Isattr-R
C. vmtune-l
D. vmo-L
Answer: D
IBM examen certification 000-221 000-221 000-221 000-221 examen
NO.7 What option will boot an LPAR directly from DVD media, without any user interaction required, when
starting the LPAR from the Hardware Management Console (HMC)?
A. Normal
B. Diagnostic with default boot list
C. System management services
D. Open firmware OK prompt
Answer: B
IBM 000-221 000-221
NO.8 A host has a single virtual Ethernet adapter (ent0) configured with only a default PVID, and the
administrator is trying to determine why it cannot be used to reach any other system on the network. He
suspects that it may be caused by a problem in the VLAN configuration.
How would the administrator determine the VLAN for which the adapter was configured?
A. Use the command 'Isdev -I ent0' on the host to determine the port VLAN ID.
B. Use the command 'Isattr-EI ent0' on the host to determine the port VLAN ID.
C. Look on the HMC to determine which VLAN is configured for the adapter.
D. Examine the Shared Ethernet Adapter on the Virtual I/O Server to determine which VLAN the adapter
is using.
Answer: C
certification IBM 000-221 examen certification 000-221 000-221 examen
NO.9 After performing a NIM rte install, the administrator noticed that not all filesets are at the correct
Technology Level (TL). What action will help the administrator determine why the inconsistent fileset
levels were installed?
A. On the NIM server, run an Ippchk to identify if the Software Vital Product Data is valid.
B. On the NIM client, run oslevel command against the TL to identify missing prerequisites.
C. Run instfix command on NIM client to determine what filesets are inconsistent.
D. On the NIM server run the NIM IsIpp command to indentify downlevel filesets contained in the
lpp_source.
Answer: D
IBM certification 000-221 000-221 000-221
NO.10 What is a requirement for Live Partition Mobility?
A. The network and disk must be virtual.
B. The disk must be virtual and a Logical Host Ethernet Adapter (LHEA) for network.
C. The client partition must be connected to a SAN.
D. The client partition must be set up as a 'Mover Service Partition ¯:.
Answer: A
IBM 000-221 examen certification 000-221 certification 000-221 000-221
NO.11 An administrator needs to list/query the security attributes for the WPAR syswpar1. Which command
will do this?
A. Issecattr-W syswpar1
B. Issecconf-w syswpar1
C. Isattr-s syswpar1
D. Iswpar-S syswpar1
Answer: D
certification IBM 000-221 examen certification 000-221 000-221
NO.12 What is the difference between deferred and concurrent firmware updates.?
A. Deferred firmware can be applied concurrently but contains updates that affect the internal program
load path, which are not activated until the next time the server is shut down and restarted.
B. Concurrent firmware must be done on all LPARs in the frame at the same time. Deferred firmware can
be loaded on each LPAR at a different time and only becomes active when the LPAR is shutdown and
restarted.
C. Deferred firmware can only be applied during an outage to the managed system as it will automatically
shut the managed system down during its installation.
D. Concurrent firmware is only for minor fixes to the system mircocode while deferred firmware contains
major fixes to the service processor.
Answer: A
IBM 000-221 000-221 000-221
NO.13 Which technology provides the maximum amount of usable storage and resilience for a system with 6
physical volumes?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 6
Answer: C
IBM examen 000-221 examen 000-221 examen
NO.14 An LPAR is configured with strict logical volume mirroring across two disks for resilience. The
administrator would like to ensure if one disk fails the volume group stays online. Which command will
ensure that the datavg volume group stays online?
A. varyonvg -n datavg
B. mirrorvg-Q-c 2 datavg
C. mklvcopy -e m -s y (each logical volume name) 2
D. chvg -Qn datavg
Answer: D
IBM examen certification 000-221 000-221 000-221 000-221 examen
NO.15 Which TWO groups of actions will create a CDROM file system for device cd0 and mount this on /cdfs?
(Select 2)
A. cdutil-s-kcd0/cdfs mount /cdfs
B. Define cd0 mount point as /cdfs in file /etc/cdromd.conf startsrc -s cdromd cdmount cd0
C. Define cd0 mount point as /cdfs in /etc/filesystems as vfs type jfs2 mount /cdfs
D. crfs-vcdrfs-pro-d'cd0'-mVcdfs' mount /cdfs
E. mkfs-v/cdfs/dev/cd0 mount /cdfs
Answer: B,D
IBM examen 000-221 examen certification 000-221 000-221 examen 000-221 000-221
NO.16 The following information has been reported in an AIX error log:
How can the administrator prevent the error from reoccurring?
A. Create a secondary dump device greater than 266MB
B. Increase primary dump device size greater than 266MB
C. Increase /var" file system to ensure it has a minimum of 266MB free space
D. Increase "/var/adm/ras/livedump" file system to ensure it has a minimum of 266MB free space
Answer: C
IBM 000-221 examen 000-221 000-221
NO.17 New change control procedures dictate that system maintenance windows be shown to each user after
logging into the system using ssh or telnet. Updating which file or files will accomplish this task?
A. The message of the day file
B. The user default attributes file
C. User and admin system alert files
D. The var daily message files
Answer: A
IBM 000-221 examen certification 000-221
NO.18 What are key considerations when planning for Live Application Mobility?
A. The WPAR is an Application WPAR and both global environments are at the same AIX level
B. That the WPAR is checkpointable and both global environments are on the same subnet
C. The NFS services are running and applications are stopped
D. The NFS services are running and there is an HMC attached to both managed systems
Answer: B
IBM examen 000-221 certification 000-221 000-221 examen 000-221 examen
NO.19 AIX has been installed on an LPAR with 32 GB of memory. What should be checked first, before
increasing the paging space beyond the default 512MB?
A. The maximum memory attribute in the LPAR profile.
B. Quantity and size of hosted filesystems.
C. Disk device distribution and utilization.
D. Paging requirements of applications that will be hosted.
Answer: D
IBM certification 000-221 000-221 certification 000-221
NO.20 An administrator plans to duplicate the active rootvg on a given system to a spare disk that will be
migrated to newer hardware. Which flag on 'alt_disk_copy' must be used to reset user-defined device
configurations to defaults?
A. X
B. R
C. O
D. D
Answer: C
IBM 000-221 000-221
Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A IBM 000-221 de Pass4Test.
没有评论:
发表评论