2013年11月3日星期日

Symantec ST0-147, de formation et d'essai

C'est sûr que le Certificat Symantec ST0-147 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Symantec ST0-147, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Symantec ST0-147 peut bien tester la professionnalité de IT.

Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Symantec ST0-147.

Le test Symantec ST0-147 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.

Le test Symantec ST0-147 est l'un très improtant dans tous les tests de Certification Symantec, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Symantec ST0-147. Cet outil de formation est convenable pour les candidats de test Symantec ST0-147. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.

Code d'Examen: ST0-147
Nom d'Examen: Symantec (Veritas Cluster Server 6.0 for Unix Technical Assessment )
Questions et réponses: 108 Q&As

La population de la Certification Symantec ST0-147 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

Pass4Test est un site à offrir particulièrement la Q&A Symantec ST0-147, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Symantec ST0-147, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Symantec ST0-147 et même se renforcer vos connaissances professionnelles IT.

ST0-147 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-147.html

NO.1 You have removed a system from a running Veritas Cluster Server cluster so that the cluster now only
has seven nodes. You need to ensure the cluster will start successfully after a complete cluster shutdown.
Which line should be in the /etc/gabtab file to successfully start the cluster?
A. gabconfig -c -n 7
B. clust start seed=7
C. gabconfig start seed=7
D. clust -c -n 7
Answer: A

Symantec   certification ST0-147   ST0-147   ST0-147   ST0-147

NO.2 Which two triggers can only be enabled at the resource level? (Select two.)
A. Resrestart
B. Resadminwait
C. Resfault
D. Resstatechange
E. resnotoff
Answer: B,E

Symantec   ST0-147 examen   certification ST0-147   ST0-147 examen   certification ST0-147

NO.3 When architecting Coordination Point (CP) server into a Veritas Cluster Server (VCS) environment,
what should be done to ensure the CP service remains online?
A. configure multiple CP server instances on the same node
B. configure CP server as a resource in a VCS cluster
C. ensure that the CP server is backed up regularly
D. ensure that the CP server is on a reliable network
Answer: B

Symantec   ST0-147   ST0-147   ST0-147

NO.4 In a four-node cluster configuration, main.cf is modified to remove one of the four nodes. That node is
decommissioned, and the remaining cluster configuration is unchanged. A power failure causes all three
remaining nodes to shut down. What happens when all three nodes are powered on.?
A. The three nodes form a cluster.
B. Veritas Cluster Server will need manual intervention to come online.
C. LLT will fail because the fourth node is in the llthosts.
D. Veritas Cluster Server will go into ADMIN_WAIT.
Answer: B

Symantec   certification ST0-147   ST0-147

NO.5 The administrator of a four-node Veritas cluster has configured notifications as highly available for all
notification methods. How many notification manager resources are running when all nodes are
considered?
A. 1
B. 2
C. 4
D. 8
Answer: A

Symantec examen   certification ST0-147   ST0-147   certification ST0-147   ST0-147

NO.6 Which two resource attributes need to be correctly set to prevent an unplanned outage due to an
improper configuration that might cause a fault during the online process of the new resource? (Select
two.)
A. AutoStart
B. Critical
C. Enabled
D. AutoDisabled
E. MonitorOnly
Answer: B,C

Symantec   ST0-147 examen   ST0-147   certification ST0-147   ST0-147

NO.7 One of the three coordinator disks needs to be repurposed as a data disk. What can the administrator
do to accommodate growth in the data center and still provide SCSI-3 I/O fencing?
A. use gatekeeper LUNs to provide additional coordinator disks
B. replace all coordinator disks with Coordination Point servers
C. remove a coordinator disk from the cluster and replace it with a Coordination Point server
D. use compressed disks to double the space available for coordinator disks to enable future growth
Answer: C

certification Symantec   certification ST0-147   ST0-147   ST0-147   ST0-147   certification ST0-147

NO.8 What is the first step when upgrading the operating system on a single node in a running multi-node
Veritas Cluster Server (VCS) cluster?
A. offline service groups on the node
B. freeze the service groups
C. migrate parallel service groups
D. shut down VCS on all nodes
Answer: A

Symantec   ST0-147   ST0-147 examen   ST0-147

NO.9 An additional email address was added to the Veritas Cluster Server notifier resource without any other
actions being taken. All but one user is receiving notifications. How can this problem be solved?
A. refresh the mailbox of the impacted user
B. restart the notifier resource
C. restart the SNMP daemon
D. restart the HAD daemon
Answer: B

Symantec   certification ST0-147   ST0-147   ST0-147

NO.10 Which two actions can be taken to determine whether an application clustered with Veritas Cluster
Server (VCS) has been successfully started or stopped? (Select two.)
A. examine the online log file
B. examine the engine log file
C. view the Security Log from the VCS Java GUI
D. view the Log Desk from the VCS Java GUI
E. view the Application_A.log file
Answer: B,D

Symantec   certification ST0-147   ST0-147 examen

NO.11 While Veritas Cluster Server supports nodes in a cluster using different hardware or operating system
versions, this is potentially undesirable for which two reasons? (Select two.)
A. user security
B. inability to handle load on failover
C. cluster upgrades
D. operational complexity
E. network connectivity
Answer: B,D

Symantec   ST0-147 examen   certification ST0-147   certification ST0-147

NO.12 Which type of resources are considered by Veritas Cluster Server when determining whether a service
group is online?
A. OnOnly
B. OnOff
C. Persistent
D. None
Answer: B

Symantec examen   ST0-147   ST0-147   ST0-147   certification ST0-147

NO.13 Which two actions must be taken to upgrade an application under Veritas Cluster Server control?
(Select two.)
A. verify that the application agent supports the new version
B. verify that the new version is supported with haagent verify
C. freeze the application service group
D. freeze the application resources
E. stop the application agent on all systems
Answer: A,C

certification Symantec   certification ST0-147   ST0-147 examen   certification ST0-147   ST0-147 examen   ST0-147

NO.14 Refer to the exhibit.
An administrator has configured preferred fencing. Cluster communication breaks and separates sym1
from the other cluster nodes. Which node(s) will survive the fencing race?
A. sym1 only
B. sym2 only
C. sym3 only
D. both sym2 and sym3
Answer: D

certification Symantec   ST0-147   ST0-147   certification ST0-147

NO.15 An administrator is manually adding a node named sym3 to an existing two-node cluster. What must
be done after installing Veritas Cluster Server and configuring cluster communications on the new node?
A. run hastart -add sym3 on any node
B. run hasys -force sym3 on the new node
C. run haclus -addnode sym3 on the new node
D. run hastart on the new node
Answer: D

Symantec   ST0-147   ST0-147   ST0-147 examen   ST0-147

Pour réussir le test Symantec ST0-147 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Symantec ST0-147. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Symantec ST0-147 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

没有评论:

发表评论