CheckPoint 156-510, de formation et d'essai

Pass4Test est un seul site de provider le guide d'étude CheckPoint 156-510 de qualité. Peut-être que vous voyiez aussi les Q&A CheckPoint 156-510 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Le test CheckPoint 156-510 est l'un très improtant dans tous les tests de Certification CheckPoint, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Code d'Examen: 156-510
Nom d'Examen: CheckPoint (VPN-1/FireWall-1 Management III)
Questions et réponses: 165 Q&As

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test CheckPoint 156-510.

Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification CheckPoint 156-510, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.

Pour réussir le test CheckPoint 156-510 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test CheckPoint 156-510. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test CheckPoint 156-510 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

156-510 Démo gratuit à télécharger: http://www.pass4test.fr/156-510.html

NO.1 Which are two network related conditions required by high availability in SEP VPN's?
A. The gateways must be synchronized
B. Traffic must be redirected correctly to the backup gateway when the primary gateway fails
C. The gateways must use identical MAC addresses
D. NTP (network time protocol) must be configured between both gateways
Answer: A, B

CheckPoint examen   certification 156-510   156-510 examen

NO.2 What is the maximum limit to the number of secondary management modules allowed?
A. No limit
B. 4
C. 2
D. 1
E. 8
Answer: A

CheckPoint examen   156-510 examen   156-510   156-510   156-510   certification 156-510

NO.3 Which of the following should be disabled in a Windows NT platform when installing
FW-1?
A. WINS
B. RPC
C. NetBIOS
D. All of them
E. DHCP relay
Answer: D

CheckPoint   156-510   156-510   certification 156-510   156-510

NO.4 What is true about detecting "blocked connection port scanning"?
A. It requires less memory than general port scanning
B. It is less secure than general port scanning
C. It is more secure than general port scanning
D. It requires more memory than general port scanning
Answer: A, B

CheckPoint examen   certification 156-510   156-510 examen   certification 156-510   certification 156-510   156-510

NO.5 Which two types of overlapping encryption domains are supported by FW-1?
A. Partial overlap
B. Full overlap
C. Proper subset
D. Partial subset
Answer: B, C

CheckPoint examen   156-510   156-510 examen   156-510   156-510 examen

NO.6 CPMAD will try to connect to the LEA server a number of times before giving up. What
are the default values for the number of connection attempts and the time interval between
them?
A. 20 times with 30secs between attempts
B. 10 times with 60secs between attempts
C. 5 times with 60secs between attempts
D. 10 times with 10secs between attempts
Answer: B

CheckPoint   156-510   certification 156-510   156-510

NO.7 If CPMAD terminates, how can you restart it?
A. By using the GUI log client
B. It automatically starts itself
C. By using fw cpmadstart
D. By using fwstop/fwstart
Answer: D

certification CheckPoint   156-510   156-510   156-510 examen   156-510

NO.8 In a resilient MEP topology, what mechanism can be used by SecuRemote to determine
that the primary gateway is still available?
A. TCP Ping
B. TCP keepalives
C. RDP status queries
D. UDP ping
Answer: C

CheckPoint   156-510   156-510   156-510

NO.9 Addresses allocated from an IP pool remain allocated for a configurable period, even after
all connections to that address are closed. What is the default time before the address is
returned to the pool?
A. 120 mins
B. 180mins
C. 30 mins
D. 60 mins
Answer: D

certification CheckPoint   156-510   certification 156-510   156-510   156-510 examen

NO.10 By default a Windows NT platform enables both TCP/IP and IPX. What does FW-1 do
with any IPX traffic?
A. Logs it, then drops it
B. Allows it through without being inspected
C. Drops all traffic regardless
D. Inspects the traffic and decide whether to allow it through
Answer: B

certification CheckPoint   156-510   certification 156-510   156-510

NO.11 What does LDAP stand for?
A. Link level Direct Access Process
B. Layered Directory Administration Protocol
C. Layer Dependent Administration process
D. Lightweight Directory Access Protocol
Answer: D

CheckPoint   156-510   156-510   156-510

NO.12 When using IP pools for MEP VPN access, where would you specify the pool to be used for
a particular gateway?
A. The NAT screen of the gateway's properties configuration
B. The ADVANCED screen of the gateway's properties configuration
C. The VPN screen of the gateway's properties screen
D. The TOPOLOGY screen of the gateway's properties configuration
Answer: A

CheckPoint examen   156-510 examen   certification 156-510   156-510

NO.13 When making changes to users in an LDAP server using the policy editor
usermanager, when will the changes take effect?
A. After the user database is downloaded
B. When you log out of policy editor
C. After a policy download
D. When cache times out
Answer: A, C, D

certification CheckPoint   certification 156-510   certification 156-510   156-510 examen   156-510

NO.14 How much memory is reserved for the VPN-1/FW-1 kernel on a Nokia platform?
A. 5 MB
B. 15 MB
C. 3 MB
D. 10 MB
Answer: A

CheckPoint examen   certification 156-510   certification 156-510

NO.15 How often will SecuRemote check for the availability of a VPN gateway by default?
A. 60 secs
B. 120 secs
C. 30 secs
D. 90 secs
Answer: A

certification CheckPoint   certification 156-510   156-510   certification 156-510

NO.16 In a load sharing MEP environment accessed by secuRemote.What is true about gateway
selection?
A. SecuRemote will choose the gateway closest to the server
B. SecuRemote will use the first gateway to respond
C. SecuRemote will chose the gateway randomly
D. SecuRemote will prefer its primary gateway if both respond
Answer: C

certification CheckPoint   156-510   156-510   156-510

NO.17 When installing FW-1 on a Windows NT platform, what state should IP forwarding be in
for correct FW-1 operation?
A. Enabled
B. Disabled
Answer: A

certification CheckPoint   156-510   certification 156-510

NO.18 You can tell if CPMAD is enabled because you see the message
"FireWall-1: Starting cpmad (Malicious Activity Detection)"
whenyou perform a fwstart. True of false?
A. False
B. True
Answer: A

certification CheckPoint   156-510   156-510   156-510   156-510 examen

NO.19 What is true when using SEP high availability encryption topologies?
A. Gateways must use the same FW-1 build level
B. All of these
C. You must use a distributed installation of VPN-1/FW-1
D. Gateways must use the same platform and OS
E. Gateways must run identical policies
Answer: B

CheckPoint examen   156-510   156-510

NO.20 What is a land attack?
A. It causes incomplete TCP connections
B. It involves gaining access by imitating an authorized IP address
C. It involves scanning for ports on an IP address that will allow access
D. It causes a server to send packets to itself
Answer: D

CheckPoint   156-510   156-510 examen

Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test CheckPoint 156-510 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.