Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
La Q&A ISEB BH0-010 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification ISEB BH0-010.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification ISEB BH0-010. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification ISEB BH0-010. Il n'y a pas de soucis à réussir le test avec une haute note.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test ISEB BH0-010 est une bonne examination. Mais c'est difficile à passer le test ISEB BH0-010. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Code d'Examen: BH0-010
Nom d'Examen: ISEB (BCS Certified Tester Foundation Level 2011 syllabus)
Questions et réponses: 120 Q&As
Le test Certification ISEB BH0-010 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test ISEB BH0-010. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test ISEB BH0-010.
BH0-010 Démo gratuit à télécharger: http://www.pass4test.fr/BH0-010.html
NO.1 Which tasks would USUALLY be performed by a test leader and which by the tester?
a) Adapt planning based on test results.
b) Create test specifications.
c) Plan tests.
d) Write or review a test strategy
A. c and d by the test leader; a and b by the tester
B. a and b by the test leader; c and d by the tester.
C. a and d by the test leader; b and c by the tester
D. a, c and d by the test leader; b by the tester.
Answer: D
certification ISEB BH0-010 examen BH0-010 BH0-010 BH0-010 examen
NO.2 Given the following flow chart diagram:
What is the minimum number of test cases required for 100% statement coverage and 100% decision
coverage, respectively?
A. Statement Coverage = 1, Decision Coverage = 3.
B. Statement Coverage = 2, Decision Coverage = 3.
C. Statement Coverage = 2, Decision Coverage = 2.
D. Statement Coverage = 3, Decision Coverage = 3
Answer: C
certification ISEB certification BH0-010 BH0-010 certification BH0-010 certification BH0-010
NO.3 Four testers have each submitted an incident report in which each reported a problem with the User
log-on process. User log-on is a critical component of the system. The table below describes the four
defect reports submitted.
Which Tester has reported the incident MOST effectively, considering the information and priority they
have supplied?
A. Tester 3
B. Tester 1
C. Tester 2
D. Tester 4
Answer: D
ISEB examen BH0-010 BH0-010
NO.4 Which one of the following is a characteristic of good testing in any lifecycle model?
A. Each test level has the same test objective.
B. There should be more testing activities than development activities.
C. Test design can only begin when development is complete.
D. Testers should begin to review documents as soon as drafts are available.
Answer: D
certification ISEB certification BH0-010 BH0-010 certification BH0-010 certification BH0-010 certification BH0-010
NO.5 Which statement about combinations of inputs and preconditions is true for a large system?
A. It is easy to test them all in a short time
B. It is not practically possible to test them all
C. It is not possible to test any of them
D. It is essential to test them all in order to do good testing
Answer: B
ISEB certification BH0-010 BH0-010
NO.6 Given the following state table:
Which of the following represents an INVALID transition (N)?
A. Off fromisplay Channel 1?
B. Channel 2 from Display Channel 1?
C. Stby from Live?
D. Channel 2 from Live?
Answer: A
ISEB certification BH0-010 certification BH0-010 BH0-010
NO.7 Which of the following statements are true in relation to component testing?
a) Stubs may be used.
b) May cover resource behaviour (e.g. memory leaks).
c) Tests the interactions between software components.
d) Defects are typically fixed without formally managing these defects.
A. a, c and d
B. a, b and d
C. b, c and d
D. a, b and c
Answer: B
certification ISEB BH0-010 certification BH0-010 BH0-010 examen
NO.8 The flow graph below shows the logic of a program for which 100% statement coverage and 100%
decision coverage is required on exit from component testing.
The following test cases have been run:
* Test Case 1 covering path A, B, D, G
* Test Case 2 covering path A, B, D, E, F, E, F, E, F, E, G
* Test Case 3 covering path A, C, D, E, F, E, G
Which of the following statements related to coverage is correct?
A. Statement coverage is 100%; decision coverage is 100%.
B. Statement coverage is less than 100%; decision coverage is 100%.B.Statement coverage is less than
100%; decision coverage is 100%.
C. Statement coverage is 100%; decision coverage is less than 100%.C.Statement coverage is 100%;
decision coverage is less than 100%.
D. Statement coverage and decision coverage are both less than 100%.D.Statement coverage and
decision coverage are both less than 100%.
Answer: A
certification ISEB BH0-010 certification BH0-010 certification BH0-010 BH0-010
NO.9 Which of the following are structure-based techniques?
a) Decision table testing
b) Boundary value analysis
c) Multiple condition coverage
d) Use case testing
e) Decision testing
A. a and c.
B. b and d.
C. b and e.
D. c and e.
Answer: D
ISEB examen BH0-010 examen BH0-010 examen
NO.10 A system specification states that a particular field should accept alphabetical characters in either upper
or lower case.
Which of the following test cases is from an INVALID equivalence partition?
A. Feeds
B. F33ds
C. FEEDS
D. fEEDs
Answer: B
ISEB BH0-010 examen BH0-010 examen BH0-010 examen BH0-010
NO.11 Given the following sample of pseudo code:
01.Input number of male rabbits
02 Input number of female rabbits
03 If male rabbits > 0 and female rabbits > 0 then
04 Input Do you want to breed (Yes / No)
05 If breed = No
06 Print deep male and female rabbits apart
07 End if
08 End If.
Which of the following test cases will ensure that statement 6 is executed?
A. male rabbits = 1, female rabbits = 1, breed = Yes
B. male rabbits = 1, female rabbits = 1, breed = No
C. male rabbits = 1, female rabbits = 2, breed = Yes
D. male rabbits = 1, female rabbits = 0, breed = No
Answer: B
ISEB certification BH0-010 certification BH0-010 certification BH0-010 BH0-010
NO.12 Pair the correct test design techniques (i to v) with the category of techniques (x, y and z):
i) Exploratory Testing
ii) Equivalence Partitioning
iii)Decision Testing
iv)Use Case Testing
v) Condition coverage
x) Specification-based
y) Structure-based
z) Experienced-based
A. x =i and ii; y = iii and v; z = iv.
B. x =i, ii and iv; y = v; z = iii
C. x = ii and iv; y = iii and v; z = i.
D. x = iii and iv; y = v; z = i and ii.
Answer: C
certification ISEB BH0-010 BH0-010 BH0-010
NO.13 Which of the following is a purpose of the review kick off activity?
A. Explain the objectives
B. Select the personnel group
C. Document results
D. Define entry and exit criteria
Answer: A
certification ISEB certification BH0-010 BH0-010
NO.14 Which of the following activities should be performed during the selection and implementation of a
testing tool?
A. Determine whether the organisation existing test process needs to change.
B. Conduct a proof of concept.
C. Implement the selected tool on a project behind schedule to save time. d) Identify coaching and
mentoring requirements for the use of the selected tool
D. a, b and c.
Answer: D
ISEB BH0-010 examen certification BH0-010
NO.15 Given the following decision table:
Which of the following test cases and expected results is VALID?
A. 23 year old in insurance class A Premium is 90 and excess is 2,500.
B. 51 year old in insurance class C Premium is 70 and excess is 500.
C. 31 year old in insurance class B Premium is 90 and excess is 2,500.
D. 43 year old in insurance class C Premium is 70 and excess is 1,000
Answer: A
ISEB certification BH0-010 BH0-010 BH0-010 examen
NO.16 Which of the following are characteristic of test management tools?
a) They support traceability of tests to source documents.
b) They provide an interface to test execution tools.
c) They help to enforce coding standards.
d) They manipulate databases and files to set up test data.
A. a and c
B. b and c
C. a and b
D. b and d
Answer: C
certification ISEB BH0-010 examen BH0-010 examen BH0-010 examen BH0-010 certification BH0-010
NO.17 A system under development contains complex calculations and decision logic, and it is assessed as
high risk because of the relative inexperience of the development team in the application domain. Which
of the following would be the MOST appropriate choice of test design technique for component testing?
A. Decision testing.
B. Statement testing
C. State transition testing
D. Equivalence partitioning
Answer: A
certification ISEB BH0-010 BH0-010 BH0-010 BH0-010 examen BH0-010 examen
NO.18 Which one of the following is true of software development models?
A. There are always four test levels in the V-model.
B. In a Rapid Application Development (RAD) project, there are four test levels for each iteration.
C. In Agile development models, the number of test levels for an iteration can vary depending on the
project.
D. There must be at least four test levels for any software development model.
Answer: C
ISEB certification BH0-010 BH0-010 examen BH0-010 certification BH0-010
NO.19 In which activity of the Fundamental Test Process is the test environment set up.
A. Test implementation and execution.
B. Test planning and control
C. Test analysis and design
D. Evaluating exit criteria and reporting
Answer: A
certification ISEB certification BH0-010 certification BH0-010 certification BH0-010 BH0-010 examen
NO.20 Which of the following is an example of a product risk?
A. Software that does not perform its intended functions
B. Failure of a third party
C. Problems in defining the right requirements
D. Skill and staff shortages
Answer: A
ISEB BH0-010 examen BH0-010 BH0-010 examen
Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification ISEB BH0-010, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test ISEB BH0-010.
没有评论:
发表评论